Wolf Product Information

Wolf 3D Wolf 2D

Advanced Design...
All wolf systems have been developed to give the best power, responsiveness and fuel economy available, in the most easy to use package!

Some of our many features include:

  • suitable for rotary, and 1 to 12 cylinder engines
  • a well developed and easy to use tuning system
  • special memory storage features and cartridges
  • easy installation and colour coded wiring
  • special tuning modes for drive-away installation
  • compact, lightweight and strong housings
  • standard sensors, connectors and relay supplied
    All systems are supplied with a comprehensive instruction manual, which includes a step by step tuning and installation guide. This makes it especially easy to set up and tune fuel and ignition maps.
    Special attention has been given to maximize the system responsiveness, and the rotary engine mode which includes split ignition timing for leading and trailing plugs.

    Advanced Memory...
    Included with each system is a small 'Memory Cartridge' which allows the loading and saving of complete maps and settings.

    Some examples are:

  • switching between different maps, even when the engine is running. Perfect for Economy/Power switching or instant detuning for wet driving
  • backing up maps for security or engine modifications
  • using one system for different engines or vehicles
  • wolf installers and distributors have maps for some engine types already available

    Memory Cartridges can be swapped between all Wolf systems for easy upgrading or setup with another model.
    Extra memory cartridges are available at low cost.

    Advanced User Interface...
    The user interface for the Wolf systems is a wide viewing angle backlit LCD screen for easy night and day use.
    The small size and weight make it great for dashboard mounting.

  • no PC required for adjustments
  • online tuning while engine is running
  • real-time diagnostics and engine monitoring
  • intelligent menu systems for fast tuning
  • Exhaust Gas Oxygen bargraph for air:fuel ration display The 3D system incorporates a graphic display to show the adjustment change, and lets you preview a potential adjustment before permanently setting it.
    The keypad and LCD are covered in a splashproof polycarbonate cover for durability.
  • Advanced Injection...
    128 adjustable points per map means the Wolf 3D keeps track of engine demand very accurately. We have one of the most detailed and accurate mapping systems around, but also have 'Quick Setup' methods to achieve a driveable engine very fast with only a few adjustments.

  • 16 rpm and 8 load increments
  • current limited injector drivers can run nearly any injector type and give the most stable fueling for changing conditions
  • acceleration enrichment to avoid flat spots and give best engine response
  • automatic compensation for air temperature and pressure (ram air intake systems supported)
  • special adjustment modes for fast map setup
  • full interpolation gives over 65,000 useable points
  • injector cutoff for clean deceleration

    Injector Staging allows large flow injectors to be run while keeping a smooth idle. This is crucial for turbocharged and other high output engines.

    Advanced Functions...
    Other speciality functions include:

  • adjustable rev limiter (fuel cut)
  • adjustable over temperature warning and thermatic fan control
  • turbo timer allows engine idle down from 1 to 10 minutes

    Advanced Options...

    There's no need for custom ordering, or return to the manufacturer for changes, as all wolf systems are user selectable for 4,6,8 cylinder, and rotary engine modes, as well as general setup.
    The wiring loom supplied is pre-wired at the ECU end, with plug-in cables for input and output signals.
    Fuel injection and ignition require a 'trigger' pulse from the engine to measure RPM and timing.

    The Wolf systems are very versatile, and can trigger from:

  • ignition coil (single wire)
  • the original trigger sensors on some engines
  • crankshaft or distributor sensors supplied by us, complete with metal trigger disc

    User selectable Configurations:

  • turbo or supercharged engines up to 21psi boost
  • automatic compensator selection
  • inbuilt MAP sensor, or throttle position actuation

    Advanced Backup...
    We, and our distributors are here to support all Advanced Engine Management products, giving full backup and a one year warranty on all systems.



  • RPM/LOAD Graph
    General Specifications...
    Size (2D/3D ECU): 170 x 132 x 40 mm
    Size (Hand Controller): 133 x 70 x 21 mm
    Weight (2D ECU): 480 grams
    Weight (3D ECU): 416 grams
    Weight (Hand Controller): 346 grams

    Power Supply: 6.5 to 23.5 Volts
    Operating Temperature: -40 to +85 deg.C
    RPM map steps: 500rpm
    Engine load map steps: 12.5%
    3D (8 per rpm step)
    2D (3 load bands)
    RPM Range: 0 to 12,000 rpm
    Injector Drive Capacity: up to 20 injectors (16 ohm) or 10 2.4 ohm injectors

    Wolf 3D Specific Features
    Wolf3D
    Specific Features
     

    Wolf 2D Specific Features
    Wolf2D
    Specific Features

    New Products at Redline
    New Products
    at Redline
     

    Home
    Home

    Contact us by Contact us anytime Contact us by Contact us anytime service [at]redlinerotary.com

    194 Parramatta Rd

    Auburn NSW 2144

    Australia

    Ph: +61-2-96481637

    Fax: +61-2-96481638

    Mobile: 0418-222-003 (Aus)

    Mobile: +61-418-222-003 (Intl)

    All content copyright ? 2005 Alex Blackson Automotive, Redline Rotary.
    Individual Trademarks, Copyrights & Logos remain the property of their
    respective owners. All rights reserved.
    Authored by Webbit P/L

    WebbIT Web Hosting